Ton bags use brand-new PE raw materials and additives to ensure product quality and reliability, and at the same time are easy to recycle and meet environmental protection requirements; they are used to manufacture packaging containers, packaging decoration, packaging printing, packaging and transportation, etc. to meet product packaging requirements. Big bags include metal, plastic, glass, ceramics, paper, bamboo, wild mushrooms, fibers, chemical fibers, composite materials, etc., the main packaging materials, and auxiliary materials such as coatings, adhesives, strapping, decoration, printing materials, etc. Material.
When using large bags, the first thing to pay attention to is the safety issue. In the process of use, there are usually mechanical equipment to lift the large bags. At this time, no pedestrians can walk or stand under the large bags to avoid danger. During hoisting Be careful not to tear the bag, do not load too much when loading, do not shake back and forth during lifting operations, and put it into the car as vertically as possible. Big bags cannot be dragged on the concrete floor during the handling process, which will wear out the big bags, and it will be safer during handling and transportation; when designing big bags, enterprises must fully consider the needs and uses of customers, It is also necessary to consider whether the ton bag will be used to hold food, and it must be harmless to food. If it is necessary to store it outdoors, the big bag should be placed on the shelf, and the big bag must be tightly covered with opaque shed cloth. After use, the big bag should be wrapped with paper or opaque shed cloth and stored in a ventilated place.